Oscillating heads

The servo x 1 oscillating head is an electric driven oscillating head.
It has 2 electric drives, one of which is a servo drive for setting the knife angle and the other is a DC motor to drive the knife oscillation. The oscillation frequency is fixed at 50 Hz. The oscillation drive power is 150W.
This head is used for cutting soft and medium-hard materials such as foams, sponges, leather, rubber, cardboard, cardboard, chamber materials, honeycomb foamed PVC, etc.

The servo x 2 oscillating head is an oscillating head with an electric drive.
It has 2 electric drives, both of which are digital servo drives for setting the knife angle and for driving the oscillation.
The oscillation frequency is adjustable from 0 to 70Hz. The oscillation drive power is 400W with the possibility of temporary overload up to 1200W. An additional feature of this head is that it stops the oscillations in the maximum extended position of the knife, which allows cutting thin materials without oscillation.
This head is used for cutting materials from the widest range, from soft to very hard, such as foams, sponges, leather, rubber, cardboard, cardboard, cellular materials, honeycomb foamed PVC, hard sealing boards, plasters, graphite plates, steel fiber reinforced plates and stainless steel sheets, etc.

The Atom oscillating head is a pneumatic-driven head with a high oscillation frequency of up to 300Hz (18,000 / min). It is a head designed for very fast cutting of soft materials such as cardboard, cardboard, leather, sponges, foams, chamber materials. The cutting speed of 5-layer corrugated cardboard with a thickness of 10mm reaches 700mm / s